4 Side Moulder

MOU-230UP
4-Side Moulder For Parquet
    • The MOU -230UP series is a special purpose 4-side moulder. Exclusively designed for holding type parquet, the MOU -230UP is especially ideal for the production of composite parquet. It integrates many outstanding features. Equip with right/left universal spindle and Germany-imported high frequency motor. High accuracy slots and tenons can be achieved at any angle, assuring the outstanding tightness for parquet jointing.
    Special spindle for lock-joint parquet
    The mechanism consists of right/left universal spindle, which is driven by Germany high frequency motor. Spindle speed is 6000~9000 RPM. Independent and drive design. The head can be swiveled 360degree, ensuring outstanding lock-joint accuracy.
    Driven Table Roller
    Driven table rollers reduce table wear out and guarantee the feed through of workpiece without getting stuck.
    Drive Infeed Table Roller
    The drive infeed table roller provides maximum smoothness of workpiece feeding for all types of wood material, regardless of highly moisture or extra hard materials.
    Inverter Controlled Feed System
    Feed speed via inverter provides positive feed. This machine can adjust the feeding speed according to the actual need. The speed range is 6-36 M/min.
    Spindle
    The spindle is supported by two pair of bearing to ensure accurate performance under high speed rotation.
  • Model MOU-230UP
    Max. working width 10-230 mm
    Max. working height 10-100 mm
    Infeed table length 2 M
    Spindle motor horse power 7.5 HP / 10 HP
    Universal spindle power×2 3 HP×2 (Germany high freq. motor)
    Feeding power 7.5 HP
    Feeding speed 6~36 M/min
    Diameter of spindle 40 mm/50 mm
    Spindle speed 6,000 RPM
    Universal spindle 6000~9000 RPM
    Tool diameter of horizontal spindle 100-150 mm
    Tool diameter of vertical spindle 100-180 mm
    Tool diameter of horizontal spindle 100-180 mm
    Adjustment range of straightening table 10 mm
    Adjustment of vertical spindle 50 mm
    Adjustment of horizontal spindle 30 mm
    Diameter of feeding roller 140 x Ø35 mm
    Width of steel feed roller 25 mm
    Width of steel feed rollers opposite left spindle 20 mm
    Width of rubber feed roller 50 mm
    Max. cutting capacity for 1st bottom spindle 10 mm
    Max. cutting capacity for 2st right vertical spindle 10 mm

TRUPRO-TEC Industrial Co., Ltd.

  • No. 68, Ln. 17, Hongzhi St., Tanzi Dist., Taichung City 427009 , Taiwan (R.O.C.)
  • Tel. 886-4-25358299(Rep)
  • Fax. 886-4-25332009
  • Design by Taiwan Products, B2BChinaSources, B2BManufactures, Wakema