Home
HOME > Top > WOODWORKING MACHINE > Rip Saw > Lazer Marker

Lazer Marker

LAZ-7010 / LAZ-7020
Used for Wood, Stone, Garment & Tire.

  • Characters:

    Temperature Control
    LDM70XX serial with enduring high temperature LD(70°C), and with a cooler to keep LD operating temperature within 23°C. Then, there will be the best ambiance.
    Nitrogen anti-fog & Al cover shielding
    The Laser gun is covered & isolated by aluminum cover to protect dust or noise. Nitrogen is injected in laser module to anti-fog, and to increase LD efficiency & stability
    Noise Guarded
    LDM70XX serial with special design, aluminum cover to protect noise & static electricity. But keep away from the source of static electricity is necessary.
    Full Range Input
    The input power voltage is full range and auto switching, can be from 90 to 240VAC.
    Straight Line
    The Projected line of Laser Marker compare with lever each one, so it must be straight
    Sharp / Bright
    The Projected line is very thin, the width is 1.0~4.0mm that depends on color of workpiece & the distance. The line is bright smoothly.
    Use Friendly
    The Laser marker can be used in stone machine, wood machine, tire machine, textile industry, screen printing, forming machine or alignment.
    And the holder of Laser can be fixed easily.
    Well Reliability
    Each Marker's input power supply is 4~5 times and output power is 2 times design. And each Marker out of factory after 7 days tested stably.

    Used for wood, tire, garment, PCB, drill, printing, cutting, stone
    LAZ-5505C
    Ø44×L180mm
    		LAZ-5710
    Ø25×L180mm
    		LAZ-5705
    Ø25×L180mm
    LAZ-2705
    Ø25×L180mm
    		LAZ-21K
    Ø25×L115mm
    		LAZ-21
    Ø25×L115mm

     Fixtures:for all types of laser (Ø25)
    AD
    Setup pitch:74mm
    Fine adjust for low vibration.
    		ST
    Setup pitch:74mm
    For rip saw, high vibration.
    		MD
    Setup pitch:45~74mm
    Is ball joint. Low vibration.
     
    		AD
    Setup at magnetized place
    Magnetic holder.

    Power supply:input 90~240VAC
    W80×D84×H70
    Setup pitch 91mm
    W138×D72×H58
    Setup pitch 150mm
    W167×D105×H52
    Setup pitch 180mm
     
     
    W138×D72×H58
    Setup pitch 150mm
    W167×D105×H52
    Setup pitch 180mm
  • Model LAZ-7010 LAZ-7020
    Power 90~240VAC
    Fixture BS or Z-Slide
    Laser diode 20mW 40mW
    System Output 10mW 20mW
    Laser Endurable Temperature 70°C
    Lifetime > 1.5 years > 1.5 years
    Work Distance 2.0~3.5 M 2.0~3.5 M

     

    Model LAZ-5505C LAZ-5710 LAZ-5705
    LAZ-2705    		 LAZ-21K
    LAZ-21
    Output power 7mW 7mW 7mW 7mW
    Project length 3 M 3 M 3 M 3 M
    Light source Diode laser
    Wavelength 635~670nm(Red)
    Line width < 1.0~2.0mm < 1.0~4.0mm < 0.8~2.0mm < 0.8~1.3mm
    Project distance < 2 M 1.5~2.5 M 1~2 M 0.8~1.5 M
    Input power PS 6.5 PS 6.5 / PSC1 for single PS4/PSC4 or PSY5 for multi-gun
    Weight 380 g 170 g 190 g 140 g

TRUPRO-TEC Industrial Co., Ltd.

  • No. 68, Ln. 17, Hongzhi St., Tanzi Dist., Taichung City 427009 , Taiwan (R.O.C.)
  • Tel. 886-4-25358299(Rep)
  • Fax. 886-4-25332009
  • Design by Taiwan Products, B2BChinaSources, B2BManufactures, Wakema