Shaper-Spindle

SM-735T
Spindle Shaper
    • INTERCHANGEABLE SPINDLES: Choice of 4 spindle diameters- 1", 1-1/4", 1-3/8", 1-1/2" or choice of metric sizes- 25mm, 30mm, 35mm, 40mm. Spindle has MK5 taper to ensure precision fitting and allow quick changeover of another spindle.
    • QUICK CHANGE SPINDLE SPEEDS: The spindle is driven by four-speed pulley for spindle speeds of 3000, 4500, 7500 and 10000 RPM. Change of speed is quickly and easily accomplished by simply loosening a lock lever, and shifting the complete assembly.
    • FOOT SPINDLE LOCK: The spindle is foot treadle locked for convenient cutter and spindle change.
    • FOOT SPINDLE BRAKE: Treadle plate provides instant stop of the running spindle after power has been turned off.
    • REVERSIBLE SPINDLE ROTATION: The spindle is reversible to ensure safe rotation in clockwise or counter-clockwise direction.
    • ROUTING OPERTION: Optional collets can be supplied to enable the shaper do a routing application. Provides excellent flexibility all in one shaping system.
    • TILTING SPINDLE: The tilting spindle provides angle cutting from -5° ~ 90° ~+45°. Spindle tilting handwheel is located at front within easy reach. A tilt scale is attached for accurate angle setting. A locking handle anchors spindle into fixed angled position.
    • SPINDLE RAISING: The spindle is raised or lowered by a graduated handwheel, providing 0.04" elevation per full revolution of the handwheel. Quick clamp lever positively holds spindle at a required setting.
    • TABLE INSERTS: The spindle is fitted with 5 insert rings permitting for use of a wide variety of shaper cutters. Maximum insert opening diameter is 13-1/4", allowing use of insert cutterheads.
    • FENCE: Precision machined fence provides the accuracy demanded in complex shaping applications. The fences are supported by a massive cast iron body and integrated with a 5" cast iron dust shroud.
    • TABLE: The massive table is made from high quality cast iron (FC-25 grade), rib reinforced, and temper heat treated for maximum strength and wear resistance. Table surface is precision ground by milling and polished to 0.05mm flatness.
  • Model SM-735T
    Spindle Diameter 1" , 1-1/4" , 1-3/8" , 1-1/2" (25.4, 30, 35, 40mm) Interchangeable
    Spindle Travel 7" (180mm)
    Tilting Angle -5° ~ 90° ~ +45°
    Spindle Speeds 3000 / 4500 / 7500 / 10000 rpm. (4 Speeds)
    Spindle Taper MK5
    Table Size 36-1/2" x 48" (930 x 1220mm)
    Sliding Table Size N/A
    Sliding Table Stroke N/A
    Table Insert Opening Diameters Ø3-15/16" , 6-3/4" , 8-1/4" , 10-1/4" , 13-1/4"
    (100, 170, 210, 260, 336mm)
    Sindel Capacity Under Nut 4" , 5-1/2" , 5-1/2" , 5-1/2"
    (1" , 1-1/4" , 1-1/2" , 1-3/8" Spindle)
    Table Height 35-1/2" (900mm)
    Fence Size 23-1/2" x 5-3/4" (600 x 146mm)
    Motor Horsepower 7.5 HP (10HP opt.)
    N.W. 1430 lbs(650kgs)
    G.W. 1650 lbs(750kgs)
    Packing Dimensions 53"(L) x 52"(W) x 51"(H)

TRUPRO-TEC Industrial Co., Ltd.

  • No. 68, Ln. 17, Hongzhi St., Tanzi Dist., Taichung City 427009 , Taiwan (R.O.C.)
  • Tel. 886-4-25358299(Rep)
  • Fax. 886-4-25332009
  • Design by Taiwan Products, B2BChinaSources, B2BManufactures, Wakema